How to set up a building automation control system in an Historic Building

Product Recommendations

PPA104S.B1 Line Voltage 20A Bluetooth Zone Control
• 120-277VAC input
• Integrated 20A relay
• Output power up to 2,400W (120VAC), 5,540W (277VAC)
• UL Plenum Rated
• 1 HP motor load rated
EFS107E.A0 12V Dual-Tech Ceiling Eco Sensor
• 12VDC input
• Powered by power packs (PPA102Sx/PPA104Sx) and connected with low voltage cable
• 600 sq ft room coverage
• Daylight Harvesting
• Dual-tech PIR + Ultrasonic technology provides high accuracy and wide coverage
RTP - Tee Adaptor
• Connects from RJ45 to PH2.0
• Supports daisy chaining of multiple sensors
NOTE: Only 1st device in daisy chain can be used for daylight harvesting.
T32P Wireless Thermostat
•Centrally controlled and locally integrated with occupancy sensors. Master schedules can be pushed facility-wide or to target thermostats.
•The T32P does not support 2/4 pipe heating/cooling.
WP1025.B1 (5 Button) Battery-Powered Bluetooth Wall Switch
• Quick push-button control of Keilton+autani devices via Bluetooth
• Powered by a single CR2032 battery
• Approximately 10 years battery life
• Can be wall-mounted or used as portable remote controller
• Can be linked to a light or light group via the Keilton+autani app
EnOcean Bridge
Allows the thermostat to leverage wireless remote sensor(s), in addition to averaging across multiple sensors.

Occupancy / Vacancy Sensing
Turn lights on when occupants are in a space and off when they vacate the space. Alternate Functionality: Partial-on and manual-on modes are supported for additional savings and for more stringent local codes.
High-End Trim / Institutional Tuning
Set the maximum light level based on customer requirements in each space to prevent overlighting.
Local Dimming Control
Permit occupants to lower the light level below the high-end trim for comfort and additional savings.
Daylight Harvesting
Dim indoor and outdoor lighting when daylight is available. Multiple zones are supported where required by code.
HVAC Control
Manage smart thermostats and sensors to implement temperature setback of HVAC equipment based upon occupancy or timeclock.
Plug Load Control
Manage control of select plug loads for Energy Code Compliance and the elimination of phantom loads when the building is not occupied.
Automatic Scheduling & Timeclock*
Automatically dim or shut off lighting based on centrally managed schedules.
* Requires Autani Manager or CR02-W.A0.
Demand Response*
Manage lighting and electrical loads per utility requirements during periods of high demand.
*Requires Autani Manager.

Business Outcomes