Hybrid Wired & Wireless Solution

Hybrid Wired & Wireless Solution
Uniting existing wired lighting with wireless lighting controls to create a practical lighting solutions managed via EnergyCenter. This system is also open to be augmented with HVAC, plug load, refrigeration sensing, people counting and metering management.
Product Recommendations

PPA104S.B1 Line Voltage 20A Bluetooth Zone Control
- 120-277VAC input
- Integrated 20A relay
- Output power up to 2,400W (120VAC), 5,540W (277VAC)
- UL Plenum Rated
- 1 HP motor load rated

IFS108-N.A0 Clip-Mount Panel Sensor
- Clip-mount allows sensor to attach to luminaire housing
- 12V sensor with oval shape is ideal form factor for panels
- Bluetooth PIR analog sensor with Algo2 algorithm to maximize detection without false trigger
- Allows existing panel and downlight luminaires to upgrade to luminaire level lighting control (LLLC)
- Daylight Harvesting

EFS107E.A0 12V Dual-Tech Ceiling Eco Sensor
- 12VDC input
- Powered by power packs (PPA102Sx/PPA104Sx) and connected with low voltage cable
- 600 sq ft room coverage
- Daylight Harvesting
- Dual-tech PIR + Ultrasonic technology provides high accuracy and wide coverage

RTP – Tee Adaptor
- Connects from RJ45 to PH2.0
- Supports daisy chaining of multiple sensors
- NOTE: Only 1st device in the daisy chain can be used for daylight harvesting.

WP1025A 5-Key Battery-Powered Bluetooth Wall Switch
- Quick push-button control of Keilton+autani devices via Bluetooth
- 3-scene programmable button
- Powered by 2 x AAA batteries
- Approximately 5-8 years battery life
- Secure wall mount
- Can be linked to a light or group via app
Control Strategies

Occupancy / Vacancy Sensing
Turn lights on when occupants are in a space and off when they vacate it. Alternate Functionality: Partial-on and manual-on modes are supported for additional savings and more stringent local codes.

High-End Trim / Institutional Tuning
Set the maximum light level based on customer requirements in each space to prevent overlighting.

Daylight Harvesting
Use dim lighting when daylight is available. Multiple zones are supported where required by code.

Local Dimming Control
Permit occupants to lower the light below the high-end trim for comfort and additional savings.

Automatic Scheduling & Timeclock*
Automatically dim or shut off lighting based on centrally managed schedules.
* Requires Autani Manager or CR02-W.A0.

Demand Response*
Manage lighting and HVAC electrical loads to limit ratchet charges and peak demand pricing periods.
* Requires Autani Manager.
Business Outcomes
- Reduce eye strain from over or under lighting to improve the well-being of your staff.
- Improve environmental comfort where healthy, happy people contribute more while constructing a higher performing healthcare organization.
- Log space utilization for insights on operational costs.
- Align energy costs with comfort, occupancy, and safety requirements.
- Receive better information and alerts regarding critical lighting system operations.